LANP CABLE INDUSTRIAL LIMITED · Cable manufacturer since 2003
LANP Cable Request A Quote
Cat5e Patch Cord 40M — Cat5e Patch Cord manufactured by LANP CABLE

Product photograph supplied by the factory. Colour and print are set per order.

CAT5e Patch Cord

Cat5e Patch Cord 40M

RJ45 Splitter Network Twisted Pair UTP Cat 5e Patch Cord 24AWG CU CCA For Laptop Router RJ45 Internet Cable

Cat5e Patch Cord 40M sits in the LANP CAT5e Patch Cord range as a UTP CAT5e bare copper build. As catalogued by the factory: RJ45 Splitter Network Twisted Pair UTP Cat 5e Patch Cord 24AWG CU CCA For Laptop Router RJ45 Internet Cable.

MOQ runs from 100 m for a trial reel up to production runs of 50,000 m, with bulk production typically 3-7 days from PO confirmation.

CategoryCAT5e Patch Cord
ShieldingUTP
Conductorbare copper or CCA (copper-clad aluminium)
Gauge24 AWG
MOQ100 m
Lead Time3-7 days
Get A Quote On WhatsApp Email This Specification

Reply within 24 hours, including weekends · OEM jacket printing from 1 km · T/T, L/C, Western Union, Escrow

Key Benefits

Why Buyers Specify This Line

Bare Copper Conductor

The conductor in Cat5e Patch Cord 40M is bare copper, not copper-clad aluminium. On a long run that shows up as voltage still present at the far termination rather than lost in the cable.

Unshielded Build

The UTP construction of Cat5e Patch Cord 40M keeps containment fill and termination time down. Screening only pays where you can name the interference source.

24 AWG Conductor

At 24 AWG, the conductor in Cat5e Patch Cord 40M is checked against the specification on each production lot before the drum is packed.

Packed As You Handle It

Standard packing for Cat5e Patch Cord 40M is 40 m. Custom reel and coil lengths run on production orders.

OEM Branding Available

Your brand can be extruded onto the Cat5e Patch Cord 40M jacket from 1 km per specification, alongside the rating and length markers, with box artwork and reel labels to match.

Tested Before It Ships

Every Cat5e Patch Cord 40M batch is checked for conductor resistance, continuity and dielectric strength before it reaches packing. A batch that fails a gate is held, not blended into a shipment.

Technical Data

Specification Sheet

Values below are the factory specification for Cat5e Patch Cord 40M. Anything not listed is confirmed against the production line before quoting rather than estimated.

Product NameCat5e Patch Cord 40M
CategoryCAT5e Patch Cord
Cable ClassCAT5e
ShieldingUTP — unshielded twisted pair
Conductor Materialbare copper or CCA (copper-clad aluminium)
Conductor Gauge24 AWG
ConnectorRJ45 8P8C, gold-plated contacts
Cord Length40 m
MOQ100 m sample reel, up to 50,000 m per production run
Lead Time3-7 days for bulk production
OEMJacket printing from 1 km, custom packaging available
OriginJieyang, Guangdong, China

Technical Features

  • Built to the CAT5e specification
  • UTP — unshielded twisted pair
  • RJ45 8P8C, gold-plated contacts
  • Jacket printed with specification and rating as standard

Materials

  • Conductor: bare copper or CCA (copper-clad aluminium)

Who It Is For

  • Hotels, schools and retail estates patching at volume
  • IT resellers bundling cords with hardware
  • Integrators fitting out desks and meeting rooms
  • Distributors stocking a full colour and length matrix

Problems It Solves

  • Cords that fail within months of daily re-patching
  • Length variation making rack tidiness impossible
  • CCA supplied where bare copper was specified
  • No test evidence supplied with a bulk order

Application Scenarios

  • Desk patching in offices and classrooms
  • Hotel room data points
  • IP phone and access point connections
  • Bundled accessories shipped with networking hardware
Manufacturing

How This Cable Is Built And Checked

Copper drawing from 8 mm rod

Stranding at controlled lay length

Insulation extrusion at controlled thickness

Pair twisting at category-spec lay length

Jacket extrusion with inline diameter control

Continuity, resistance and dielectric testing

Reeling and packing

Quality Control

  • Fluke DSX channel certification on every lot
  • Conductor resistance measured on every batch
  • Continuity tested end to end before reeling
  • Dielectric strength tested on the finished cable
  • Jacket continuity checked by spark tester

Certification

  • HKTC attestation of compliance covering CAT5e, CAT6, FTP/SFTP/UTP indoor and outdoor variants and CAT5 patch cable
Finished cable reels awaiting inspection at LANP CABLE
Finished reels staged for inspection before packing.
Customisation

What Can Be Changed On This Line

  • Jacket printing with your brand from 1 km per specification
  • Jacket and core colours set per order to match your market's code
  • Custom reel and coil lengths on production runs
  • Box artwork, reel labels and bag printing produced to your design

Compared With Nearby Specifications

AlternativeHow it differs
Cat5e Patch Cord 10MSame cord specification in a different length — 40 m against 10 m. Ordering the right length per position is what keeps a patch field manageable.
Cat5e Patch Cord 15MSame cord specification in a different length — 40 m against 15 m. Ordering the right length per position is what keeps a patch field manageable.
Use Guide

Installing It Without Losing Performance

  • Use a pulling grip on Cat5e Patch Cord 40M rather than hand tension, and pull steadily. Jerked pulls are what turn a good drum into a failed link.
  • Keep untwist length to the minimum the connector allows when terminating Cat5e Patch Cord 40M — it is the most common reason a field-terminated link fails while a factory cord on the same run passes.
  • Respect the bend radius on Cat5e Patch Cord 40M, especially in the last stretch into the patch panel where a full bundle is being dressed into a tight space.

Before a first bulk order of Cat5e Patch Cord 40M: request a sample reel. The approved sample becomes the reference every later production lot of this specification is checked against.

Related Products

Other Specifications In The CAT5e Patch Cord Range

See all 10 cat5e patch cord products →

Cat5e Patch CordCat5e Patch Cord 10M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 10M

8P8C RJ45 UTP Cat5e Cat5 Patch Cord Cable for Modem Router Cable Ethernet 1-30m for Router,…

UTP8 core
View specification →
Cat5e Patch CordCat5e Patch Cord 15M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 15M

CAT5E UTP Ethernet Cable Network Wire RJ45 Cat5e Patch Cord CCA for Router, Modem, switch

UTP15 m
View specification →
Cat5e Patch CordCat5e Patch Cord 1M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 1M

cat5e lan cable patch cord ethernet network cable For Computer,Printer,Laptop

1 m
View specification →
Cat5e Patch CordCat5e Patch Cord 20M — Cat5e Patch Cord manufactured by LANP CABLE

Cat5e Patch Cord 20M

20m Ethernet Cable Category 5e Internet RJ45 Network LAN UTP Patch Cord Cat5e for Router,…

UTP20 m
View specification →

Related guides

Where it is installed

Questions

Cat5e Patch Cord 40M — Questions

Is Cat5e Patch Cord 40M bare copper or CCA?

Cat5e Patch Cord 40M is catalogued in both conductor materials. Tell us which the application needs and that is what ships — the reel label says which one you received.

How is Cat5e Patch Cord 40M packed?

The stocked format is 40 m. Custom reel and coil lengths run on production orders — send the length schedule with the enquiry.

Can you print our brand on Cat5e Patch Cord 40M?

From 1 km we extrude your brand onto the Cat5e Patch Cord 40M jacket itself. Under that minimum the branding goes on packaging instead.

What is the minimum order and lead time for Cat5e Patch Cord 40M?

A trial reel of 100 m is enough to evaluate Cat5e Patch Cord 40M. Production runs go to 50,000 m and take about 3-7 days once the PO is confirmed.

Is Cat5e Patch Cord 40M covered by a compliance certificate?

Yes — the HKTC attestation covering our LAN cable range applies to Cat5e Patch Cord 40M. A copy is issued with the shipment.

Request pricing on Cat5e Patch Cord 40M

Send quantity, destination and any custom requirement. MOQ from 100 m, bulk lead time 3-7 days.

Chat on WhatsApp Email UsDownload Catalogue